|
 With over 17 years of experience preparing candidates for the contractor exams for the trade and Business, Law and Management, Contractor School Online (CSO) is your primary resource to help you pass your state contractor license exam! We offer online practice tests, study materials, books, CD-ROMs, crash courses and more depending on the state and trade.
To become a certified contractor you must pass a Business and Law exam in many states and, depending on the classification you need, you may need to pass a trade exam as well. If you are unsure what your classification requires, please use our
Information Request Form.
Contractor School Online (CSO) will assist you with their professional consultants and provide study materials, also practice tests for the Business, Law, and Management and your trade if available.
If purchases are made elsewhere make sure the correct author, title and year are appropriate for the trade.
CSO Business and Law Practice Test coincides with the required State Contractor’s Manual.
Please note: Inventory Pricing - Contractors State Bonding and Subjects may change without notice.
($85)
Content
-
Business, Law and Management Online Practice Test
-
3 Months Access, Available 24/7
|
|
($95)
Content
-
Framing, Millwork, Cabinets, Finish and Rough Carpentry Online Practice Test
-
3 Months Access, Available 24/7
|
|
($57.98)
-
General and Residential Business Management Manual
|
|
($95)
Content
-
General and Residential Contractor Online Practice Test
-
3 Months Access, Available 24/7
|
|
($95)
Content
-
Low Voltage Contractor Online Practice Test
-
3 Months Access, Available 24/7
|
|
($95)
Content
-
Electrical Contractor Online Practice Test
-
3 Months Access, Available 24/7
|
|
($95)
Content
-
Heating and Air Conditioning Online Practice Test
-
3 Months Access, Available 24/7
|
|
($95)
Content
-
Plumbing Online Practice Test
-
3 Months Access, Available 24/7
|
|
($222.98)
-
Business, Law and Management Online Practice Test
-
General and Residential Contractor Online Practice Test
-
3 Months Access, Available 24/7
-
Business, Law and Management Manual
|
|
($168)
-
Business, Law and Management Online Practice Test
-
General and Residential Contractor Online Practice Test
-
3 Months Access, Available 24/7
|
|
($222.98)
-
Business, Law and Management Online Practice Test
-
Framing, Millwork, Cabinets, Finish and Rough Carpentry Online Practice Test
-
3 Months Access, Available 24/7
-
Business, Law and Management Manual
|
|
($168)
-
Business, Law and Management Online Practice Test
-
Framing, Millwork, Cabinets, Finish and Rough Carpentry Online Practice Test
-
3 Months Access, Available 24/7
|
|
($222.98)
-
Business, Law and Management Online Practice Test
-
Residential Basic and Light Commercial Contractor Online Practice Test
-
3 Months Access, Available 24/7
-
Business, Law and Management Manual
|
|
($168)
-
Business, Law and Management Online Practice Test
-
Residential Basic and Light Commercial Contractor Online Practice Test
-
3 Months Access, Available 24/7
|
|
($168)
-
Business, Law and Management Online Practice Test
-
Residential Contractor Online Practice Test
-
3 Months Access, Available 24/7
|
|
($222.98)
-
Business, Law and Management Online Practice Test
-
Low Voltage Contractor Online Practice Test
-
3 Months Access, Available 24/7
-
Business, Law and Management Manual
|
|
($168)
-
Business, Law and Management Online Practice Test
-
Low Voltage Contractor Online Practice Test
-
3 Months Access, Available 24/7
|
|
($222.98)
-
Business, Law and Management Online Practice Test
-
Electrical Contractor Online Practice Test
-
3 Months Access, Available 24/7
-
Business, Law and Management Manual
|
|
($168)
-
Business, Law and Management Online Practice Test
-
Electrical Contractor Online Practice Test
-
3 Months Access, Available 24/7
|
|
($150)
-
Business, Law and Management Online Practice Test
-
Heating and Air Conditioning Online Practice Test
-
3 Months Access, Available 24/7
|
|
($168)
-
Business, Law and Management Online Practice Test
-
Plumbing Online Practice Test
-
3 Months Access, Available 24/7
|
|
($222.98)
-
Business, Law and Management Online Practice Test
-
Plumbing Online Practice Test
-
3 Months Access, Available 24/7
-
Business, Law and Management Manual
|
|
GEORGIA STATE
CONTRACTOR TRADES
Residential, General, Limited Service Specialty and Traditional Specialty, Examinations and Study Guides
Contractor School Online (CSO) will assist you with their professional consultants and provide study materials, also practice
tests for the Business,
Law and your trade if available. If purchases are made elsewhere make sure the correct author, title and year are appropriate for the trade.
CSO Business, Law and Management Practice Test coincides with the required State Contractor?s Manual.
Please note: Inventory Pricing - Contractors State Bonding
and Subjects may change without notice.
Examination Registration and Scheduling Procedures
Once a candidate has passed the Business Law portion of any Residential Contractor?s Exam, he/she has met the Business Law licensure requirement for all other Residential Contractors Exams. A candidate must also pass the licensure portion of the exam for their specific profession ? Residential Basic Contractor, Residential ? Light Commercial, General Contractor, General Contractor (Limited Tier Individual), and General Contractor (Limited Tier Qualifying Agent).
Eligibility
All eligibilities are valid for 1 year from the date that the application is received by the Board. If you do not pass the examination within the 1 year period, you must re-apply with the Board.
You must pass both the Business, Law and Management and the Trade examinations within the 1 year period. If you fail one examination, and pass the other examination, you will only need to retake the failed examination.
If you fail the examination twice within the 1 year eligibility period your application becomes void. You will need to reapply to the Board, for both examinations, regardless if you had passed one during the 1 year period. You may re-apply after the original 1 year eligibility period expires.
Scheduling An Appointment To Take The Examination
Once you have made payment for your examination services, you are ready to schedule your examination. It is important to remember that you are responsible for contacting testing center to schedule your examination.
Canceling An Examination Appointment
You may cancel and reschedule an examination appointment without forfeiting your fee if your cancellation notice is received 2 days before the scheduled examination date.
Scheduling For A Re-Examination
In order to re-test, you must re-register again with the Board.
Special Examination Arrangements
All examination centers are equipped to provide access in accordance with the Americans with Disabilities Act (ADA) of 1990, and every reasonable accommodation will be made in meeting a candidate?s needs. Qualified candidates with sensory, mental or physical disabilities that would prevent them from taking the examination under standard conditions may request special accommodations.
Required Identification At Examination Site
You must provide 2 forms of identification. One must be a VALID form of government issued identification (driver?s license, state ID, passport), which bears your signature and has your photograph. The second ID must have your signature and pre-printed legal name. All identification provided must match the name on the Examination Registration Form and your Registration Confirmation Notice.
Score Reporting
In order to pass the examinations, you must achieve a minimum score of 70%. Your score will be given to you immediately following completion of the examination. The following summary describes the score reporting process:
On screen ? your score will appear immediately on the computer screen. This will happen automatically at the end of the time allowed for the examination; if you are using review features, you will be able to obtain your score immediately when you indicate that you have finished and would like to see your results. If you pass, you will immediately receive a successful notification. If you do not pass, you will immediately receive an unsuccessful notification on the screen along with a diagnostic report indicating your strengths and weaknesses by examination type.
Contractor School Online (CSO) will assist you with their professional consultants and provide study materials, also practice
tests for the Business,
Law and your trade if available. If purchases are made elsewhere make sure the correct author, title and year are appropriate for the trade.
CSO Business, Law and Management Practice Test coincides with the
required State Contractor?s Manual
Please note: Inventory Pricing - Contractors State Bonding
and Subjects may change without notice.
Testing Center Sample Questions
The following questions are offered as examples of the types of questions you will be asked during the course of the examination. They are intended primarily to familiarize you with the style and format of questions you can expect to find in the examinations. The examples do NOT represent the full range of content or difficulty levels found in the actual examinations.
1. Who is responsible for ensuring the adequacy of personal protective equipment for an employee?
A. Project owner
B. OSHA
C. Employer
D. Employee
2. The minimum allowable distance between a water closet center- line and a side wall or partition is?
A. 12 inches
B. 15 inches
C. 18 inches
D. 30 inches
3. Stumps and roots below an area to be occupied by a building must be removed from the soil a minimum depth of?
A. 6 inches
B. 12 inches
C. 18 inches
D. 24 inches
4. The required air space separating masonry veneer from the underlying sheathing shall be a minimum of?
A. 1 inch but not more than 4 1/2 inches
B. 1 1/2 inches but not more than 3 1/2 inches
C. 1 1/2 inches but not more than 4 inches
D. 2 inches but not more than 3 inches
Answers: 1: C, 2: B, 3: B, 4: A
Examination Content Outlines
Candidates must
pass the Business Law Exam for licensure in Georgia as a Residential Contractor.
Once a candidate has passed the Business Law portion of any Residential Contractor?s Exam, he/she has met the Business Law licensure requirement for all other Residential Contractors Exams.
A candidate must also pass
the licensure portion of the exam for their specific profession Residential Basic Contractor, Residential ? Light Commercial, General Contractor, General Contractor (Limited Tier Individual), and General Contractor (Limited Tier Qualifying Agent).
Business, Law and Management
Contractor School Online (CSO) will assist you with their professional consultants and provide study materials, also practice
tests for the Business,
Law and your trade if available. If purchases are made elsewhere make sure the correct author, title and year are appropriate for the trade. CSO Business
and Law Practice Test coincides with the required State
Contractor?s Manual.
State Contractor?s Business ? Law - Management
Contractor School Online Business, Law and Management Practice Test coincides with the required State Contractor?s Manual
Please note: Inventory Pricing - Contractors State Bonding
and Subjects may change without notice.
Number of Questions - Minimum Passing Score - Time Allowed
50 70% (35 correct) 120 Minutes
CONTENT OUTLINE
Subject Area Number of Items
Licensing Requirements 5
Estimating and Bidding 7
Business Organization and Financial Management 7
Tax Laws 5
Labor Laws 5
Project Management and Lien Law 6
Contracts 6
Risk Management 4
Environmental and Safety 5
REFERENCE LIST
The reference material listed below was used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK.
The following reference material is allowed in the examination center:
Residential, General Contractors, State Business, Law and Management. The Board Rules and Regulations these references will not be available in the testing center.
Contractor School Online will assist you with their professional consultants and assist you for the study materials, practice
tests for the Business,
Law and your trade if available. If you purchase elsewhere make sure the correct author, title and year are appropriate for the trade.
State Contractor?s - Business ? Law - Management
Contractor School Online Business, Law and Management Practice Test coincides with the required State Contractor?s Manual
Please note: Inventory and pricing subject to change without notice.
Residential ? Basic Contractor
Number of Questions
? Minimum Passing
Score - Time Allowed
80 70% (56 correct) 200 Minutes
Content Outline
Subject Area and Number of Items
Sitework, Footings and Foundation 8
Concrete and Concrete Reinforcement 8
Masonry 5
Carpentry 16
Roofing 8
General Code and Construction Knowledge 18
Associated Trades 10
OSHA Safety 7
REFERENCE LIST
The reference material listed below was used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK
The following reference material is allowed in the examination center:
Residential Code and Federal Regulations - (OSHA)
Carpentry and Building
Handling, Installing, Restraining, Bracing of Metal Plate Connected and Wood
Concrete Construction
Masonry - Brick, Block, Stone
Pipe and Excavation
Energy Conservation
Amendments to the State Minimum Codes
These references will not be available in the examination center.
Contractor School Online will assist you with their professional consultants and assist you for the study materials, practice
tests for the Business,
Law and your trade if available. If you purchase elsewhere make sure the correct author, title and year are appropriate for the trade.
Number of Questions
- Minimum Passing
Score - Time Allowed
115 70% (81 Correct) 330 Minutes
Content Outline
Subject Area Number of Items
Estimating, Bidding, and Pre-Construction
Services 23
Project Management 28
Project Construction 32
Project Closeout 9
Business and Financial Management 23
Reference List
The reference material listed below was used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This Examination is OPEN BOOK
The following reference material is allowed in the examination center:
Handling, Installing, Restraining, and Bracing of Metal Plate Connected Wood Trusses
Construction Jobsite Management
Business, Law and Management
Erection of Pre-Cast Concrete Products
Training and Certification of Field Personnel for Un-bonded Post-Tensioning - Level 1 Field Fundamentals
Management of Projects
Construction with Steel Deck
Pipe and Excavation Contracting
Gypsum Construction
Placing Reinforcing Bars
Handling and Erection of Steel Joists and Joist Girders
Masonry - Brick, Block and Stone
Practices of Commercial Construction
Federal Regulations
Carpentry and Building
Accessible and Usable Buildings and Facilities
Roofing and Estimating
Concrete Construction
These references will
not be available in the examination center.
Number of Questions - Minimum Passing Score - Time Allowed
115 70% (81 Correct) 330 Minutes
Content Outline
Subject Area
Number
of Items
Estimating, Bidding, and Pre-Construction
Services 23
Project Management 28
Project Construction 32
Project Closeout 9
Business and Financial Management 23
Reference List
The reference material listed below was used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This Examination Is OPEN BOOK
The following reference material is allowed in the examination center:
Handling, Installing, Restraining, and Bracing of Metal Plate and Connected Wood Trusses
Jobsite Management
Business, Law and Management
Erection of Pre-Cast Concrete Products
Post-Tensioning - Level 1 Field Fundamentals
Management of Construction Projects
Construction with Steel Deck
Pipe and
Gypsum
Placing Reinforcing Bars
Erection of Steel Joists and Joist Girders
Masonry - Brick, Block and Stone
Practices of Commercial Construction
Federal Regulations
Carpentry and Building
Accessible and Usable Buildings and Facilities
Roofing and Estimating
Concrete Construction
These references will not be available in the examination center.
Number of Questions - Minimum Passing Score - Time Allowed
115 70% (81 Correct) 330 Minutes
Content Outline
Subject Area and Number of Items
Estimating, Bidding, and Preconstruction
Services 23
Project Management 28
Project Construction 32
Project Closeout 9
Business and Financial Management 23
REFERENCE LIST
The reference material listed below was used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK
The following reference material is allowed in the examination center:
Handling, Installing, Restraining, and Bracing of Metal Plate Connected Wood Trusses
Construction Jobsite Management
Contractors' to Business, Law and Management
Guidelines for the Erection of Pre-Cast Concrete Products
Training and Certification of Field Personnel for Un-bonded Post-Tensioning - Level 1 Field Fundamentals
Management of Construction Projects - A Constructor's Perspective
SDI Construction with Steel Deck
Pipe and Excavation Contracting
Gypsum Construction
Placing Reinforcing Bars
Handling and Erection of Steel Joists and Joist Girders
Masonry - Brick, Block and Stone
Principles and Practices of Commercial Construction
Federal Regulations
Carpentry and Building
ANSI Accessible and Usable Buildings and Facilities
Roofing Construction and Estimating
Guide to Quality Concrete Construction
THESE REFERENCES WILL
NOT BE AVAILABLE IN THE EXAMINATION CENTER.
GENERAL CONTRACTOR LIMITED TIER QUALIFYING
AGENT NASCLA-ACCREDITED
NASCLA?s examination database (NED) and request that their results be sent to other jurisdictions that accept the examination, thereby reducing redundant licensing requirements.
.
Number of Questions
- Minimum Passing
Score - Time Allowed
115 70% (81 Correct) 330 Minutes
CONTENT OUTLINE
Subject Area
Number
of Items
Estimating, Bidding, and Preconstruction
Services 23
Project Management 28
Project Construction 32
Project Closeout 9
Business and Financial Management 23
REFERENCE LIST
The reference material listed below was used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK
The following reference material is allowed in the examination center:
Handling, Installing, Restraining, and Bracing of Metal Plate Connected Wood Trusses
Construction Jobsite Management
Contractors' Business, Law and Management
Guidelines for the Erection of Pre-Cast Concrete Products
Training and Certification of Field Personnel for Un-bonded Post-Tensioning - Level 1 Field Fundamentals
Management of Construction Projects - A Constructor's Perspective
SDI Construction with Steel Deck
Pipe and Excavation Contracting
Gypsum Construction
Placing Reinforcing Bars
Erection of Steel Joists and Joist Girders
Masonry - Brick, Block and Stone
Principles and Practices of Commercial Construction
Federal Regulations
Carpentry and Building Construction
ANSI Accessible and Usable Buildings and Facilities
Roofing Construction and Estimating
Guide to Quality Concrete Construction
These References will not be available in the examination
RESIDENTIAL ? LIGHT COMMERCIAL
Number of Questions
- Minimum Passing
Score - Time Allowed
90 70% (63 correct) 230 Minutes
CONTENT OUTLINE
Subject Area
Number
of Items
Sitework, Footings and Foundation 8
Concrete and Concrete Reinforcement 8
Metals 5
Masonry 6
Carpentry 16
Roofing 10
General Code and Construction
Knowledge 20
Associated Trades 10
OSHA Safety 7
REFERENCE LIST
The reference material listed below was used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
This examination is OPEN BOOK
The following reference material is allowed in the examination center:
International Building Code
International Residential Code
Federal Regulations
Carpentry and Building Construction
Handling, Installing, Restraining, and Bracing of Metal Plate Connected Wood Trusses.
Guide to Quality Concrete Construction
Georgia Accessibility Code
Masonry - Brick, Block and Stone
Pipe and Excavation Contracting
Gypsum Construction
Erection of Steel Joists and Joist Girders
SDI Construction with Steel Deck
International Energy Conservation Code
Georgia State Amendments to the State Minimum Standard Codes
Limited Service Specialty Contractors
Under O.C.G.A. and 43-41-17, specialty contractors who offer or contract to perform or undertake or perform for an owner limited, specialty, or specific trade contractor work do not have to hold a license as a residential or general contractor if they are performing work within their specialty. However, nothing in Chapter 41 shall permit a specialty contractor to perform work that falls within the licensing requirements of Chapter 14 of Title 43 where such specialty contractor is not duly licensed under such chapter to perform such work.
The Board for Residential and General Contractors has been directed by January 1, 2008, to identify specialty categories and scopes of work, allowing those specialties to contract directly with an owner without being a licensed residential or general contractor.
Anyone who is included on this list who is working for a licensed residential or general contractor under a valid permit is exempted from having to hold a residential and general contractor license of his or her own. However, such individual must ensure that he or she complies with any legal requirements (such as those found in Chapter 14 of Title 43) for his or her specialty trade.
The Board for Residential and General Contractors recognizes that limited service contractors can coordinate multiple specialty trades within the scopes of work listed below.
Traditional specialty contractors will not be required to carry a residential and general contractor license but will be
required to comply with all applicable national, state, and
local codes and ordinances.
The following list is under development and subject to change. If upon review, you believe an additional category of work falls within your scope of work please submit comments to the Board in writing. Contractor School Online is not responsible when the Board is under development subject to change.
Above Ground Storage Tanks/Silos
The following are allowable categories of work which may be completed or coordinated by an Above Ground Storage Tanks/Silos Limited Service Specialty Contractor:
Bolted steel tanks, comprised of prefabricated components shipped directly to the job site by the manufacturer.
Tanks are erected on site by ring and slave method, starting with a base ring and bolting each sheet to the slave and panel next to it, continuing around the base until the first ring is complete. The process continues upward.
Dimensions of the tanks may be from 9 feet up to 184 feet in diameter and from 8 feet to 120 feet in height.
Tools utilized in tank erection are impact wrenches, standard wrenches, pins, hammers, scaffolding, gin poles, and safety harnesses.
You may be required to hold a contractor license if your company exceeds this scope of work.
Boilers
The following are allowable categories of work which may be completed or coordinated by a Boiler Limited Service Specialty Contractor:
Electrical
Plumbing
Foundation
Any structural work will have to be less than $10,000 or 25% of the total scope of work
You may be required to hold a contractor license if your company exceeds this scope of work.
Bridge Construction
The following are allowable categories of work which may be completed or coordinated by a Bridge Construction Limited Service Specialty Contractor:
Foundation work
Pilings
Carpentry
Electrical lighting
You may be required to hold a contractor license if your company exceeds this scope of work.
Cell Towers
The following are allowable categories of work which may be completed or coordinated by a Cell Tower Limited Service Specialty Contractor:
Erosion Control
Demolition
Minor Grading
Access Road
Fencing
Signage
Landscaping
Foundations
Steel Supports
Tower
Fire Sprinkler
HVAC
Plumbing
Generator
You may be required to hold a contractor license if your company exceeds this scope of work.
Concrete Vaults
The following are allowable categories of work which may be completed or coordinated by a Heavy Equipment Limited Service Specialty Contractor:
Pre-cast concrete burial vault installation
You may be required to hold a contractor license if your company exceeds this scope of work.
Concrete Work
The following are allowable categories of work which may be completed or coordinated by a Concrete Work Limited Service Specialty Contractor:
Set the Forms
Layout
Batter Boards
Excavate
Rebar
Shoring
You may be required to hold a contractor license if your company exceeds this scope of work.
Cooling Tower
The following are allowable categories of work which may be completed or coordinated by a Cooling Tower Limited Service Specialty Contractor:
Demolition
Repair work
Foundations and supports
Stairways
Mechanical equipment
Water distribution
Associated accessories
Electrical
You may be required to hold a contractor license if your company exceeds this scope of work.
Drywall, Insulation, Studs & Acoustical
The following are allowable categories of work which may be completed or coordinated by a Drywall, Insulation, Studs and Acoustical Limited Service Specialty Contractor:
Insulation
Studs
Wood Blocking
Acoustical Treatments
Stucco and EIFS
Exterior Sheathing
Set Windows and Doors
You may be required to hold a contractor license if your company exceeds this scope of work.
EIFS and Stucco
The following are allowable categories of work which may be completed or coordinated by an EIFS and Stucco Limited Service Specialty Contractor:
Pre-manufactured Stone Veneer
Installed to Manufacturer Guidelines
Hard or Synthetic Stucco
You may be required to hold a contractor license if your company exceeds this scope of work.
Environmental Remediation
The following are allowable categories of work which may be completed or coordinated by an Environmental Remediation Limited Service Specialty Contractor:
Landfills
Hazardous Material Removal
Encapsulation of Materials
Demolition
You may be required to hold a contractor license if your company exceeds You may be required to hold a contractor license if your company exceeds this scope of work.
Greenhouses
The following are allowable categories of work which may be completed or coordinated by a Greenhouse Limited Service Specialty Contractor:in; margin-left: 0in; margin-bottom: 0.0001pt; font-size: 12pt; font-family: 'Times New Roman', serif; color: black;">
Pre-Manufactured Structures
Grading
Plumbing
You may be required to hold a contractor license if your company exceeds this scope of work.
Industrial Specialty Work
The following are allowable categories of work which may be completed or coordinated by an Industrial Specialty Work Limited Service Specialty Contractor:
Demolition
Repair work
Foundations and supports
Stairways and Platforms
Mechanical equipment
Water distribution
Associated accessories
Electrical
Conveyors
Air and gas piping to mechanical equipment
Structural supports associated with mechanical equipment
Process exhaust ductwork for connection to mechanical equipment
Fall Protection Equipment, which includes:
Demolition
Foundations and supports
Stairways and platforms
Mechanical equipment to operate the equipment
Associated accessories
Electrical
Structural frameworks and canopies over the equipment
You may be required to hold a contractor license if your company exceeds this scope of work.
Industrial Tanks
The following are allowable categories of work which may be completed or coordinated by an Industrial Tanks Specialty Contractor:
Installation, removal or relocation of storage tanks, and any miscellaneous electrical, plumbing, HVAC, structural pad or foundation work that would be required to support the tanks.
You may be required to hold a contractor license if your company exceeds this scope of work.
Internal Floating Covers and Aluminum Geodesic Domes
The following are allowable categories of work which may be completed or coordinated by an Internal Floating Covers and Aluminum Geodesic Domes Limited Service Specialty Contractor:
Engineer and install aluminum and stainless steel cover solutions for Odor Control, Emissions Reduction, Product Quality Attainment and Security in Potable and Wastewater applications. Manufacture Geodesic Domes, Flat Panels and Internal Floating Roofs for petroleum, municipal and industrial applications. Conversion of an existing External Floating Roof Tank to a Covered Floating Roof Tank. A maintenance-free dome roof for new tanks. Replace existing corroded steel fixed roofs to eliminate maintenance issues. Column free roof for new tank construction.
You may be required to hold a contractor license if your company exceeds this scope of work.
Kitchen and Bath Designers/Installers
The following are allowable categories of work which may be completed or coordinated by a Kitchen and Bath Designer/Installer Limited Service Specialty Contractor:
Definition: ?not at risk? means that the specialty party shall not be contractually responsible to an owner for the performance or cost of actual construction.
Design and space use drawings, configurations and plans for kitchens, baths, excluding any design of load bearing support or structural beams or the structural integrity of the real property.
Design configurations and specifications for cabinetry, countertops, fixtures, storage, furniture and furnishings, hardware, appliances and equipment (including new technology)
Design selection, consultation, and advise of installation of backsplashes, wall treatments and floor treatments, millwork, trim work, and finish work.
Design, selection, consultation and advise of venting, lighting design and reflective ceiling plans, provided specialty work is independent of actual construction such that the specialty designer/installer is not ?at risk.?
Design and space drawings, configurations and plans for electrical, heating and air conditioning systems provided specialty work is independent of actual construction such that the specialty designer/installer is not ?at risk? and the construction work sis performed by a licensed person as may be required by applicable law under O.C.G.A. § 43-14.
Consultation, advise and review involving plan implementation and designs on behalf of owner, provided specialty work is independent of actual construction such that he specialty designer/installer is not ?at risk.?
General project administration advice and consultation (excluding management of actual construction), quality review and consultation on behalf of owner, provided specialty work is independent of actual construction such that the specialty designer/installer is not ?at risk.?
Management and oversight of installation of cabinetry, countertops, appliances and other kitchen and bath equipment; provided such items are actually installed by the manufacturer, distributor or retailer of such product or the in-house or independent qualified installers, approved or certified by such manufacturer, distributor or retailer.
You may be required to hold a contractor license if your company exceeds this scope of work.
Landfills
Residential or general contractor license not required. All work shall be completed in compliance with all applicable national, state and local codes and ordinances.
Low-Income Weatherization and Energy-Efficiency
Basic weatherization and energy efficiency related repairs to existing residences in programs authorized by federal, state and local-funded weatherization and energy efficiency improvement assistance programs such as those contracted, governed or authorized through agencies including, but not limited to, the Department of Energy (DOE). These programs are designed to be implemented by 501(c)(3) non-profit entities and government agencies in connection with assistance to low-income persons and families which are managed and substantially paid for by the government programs and through grants and similar assistance to the non-profit entities but are not significantly paid for or managed by low-income persons and families. For-profit entities are excluded from this category
The following are allowable categories of work which may be completed or coordinated by a Low-Income Weatherization and Energy-Efficiency Limited Service Specialty Contractor:
Energy audits
Weatherization caulking and sealing
Waterproofing
Damp proofing
House wrapping
Wood Blocking
Acoustical Treatments
Exterior Sheathing ? repair only
Repair/replace windows and doors ? may not do any structural work or modifications to structure
Repair and re-roof existing roofs - may not do any structural work or modifications to structure
Interior Finish and Trim
Repair work relating to siding, stucco and other exterior finishes as necessary - may not do any structural work or modifications to structure
All work listed above must be completed by employees of the company that?s contracted to do low-income weatherization and energy efficiency work.
Insulation
Plumbing (through licensed professional pursuant to O.C.G.A. § 43-14)
HVAC (through licensed professional pursuant to O.C.G.A. § 43-14)
Electrical (through licensed professional pursuant to O.C.G.A. § 43-14)
O.C.G.A. § 43-41-17(f) reads in part: The specialty contractor otherwise exempted from license requirements under this chapter may perform work for an owner that would otherwise require a license under this chapter where the total scope of the work to be performed is predominantly of the type for which such specialty contractor is duly recognized as exempt under this subsection by the board, provided that such other work involved is incidental to and an integral part of the exempt work performed by the specialty contractor and does not exceed the greater of $10,000.00 or 25 percent of the total value at the time of contracting of the work to be performed.
Manufactured Units for Temporary Use and/or Classroom
Trailers
The following are allowable categories of work which may be completed or coordinated by a Classroom Trailer Limited Service Specialty Contractor:
Minor grading
Electrical power supply
LAN cabling
Trailer supports
Ramps and Walkways
Other related utilities and accessories
Such temporary or classroom trailers would include any pre-engineered, pre-fabricated buildings, excluding single and multi-family housing.
You may be required to hold a contractor license if your company exceeds this scope of work.
Masonry
The following are allowable categories of work which may be completed or coordinated by a Masonry Limited Service Specialty Contractor:
Stone
Brick
Pavers
Rebar
Grouting
Stucco
Pre-Cast Architectural
You may be required to hold a contractor license if your company exceeds this scope of work.
Outdoor Environment (pools)
The following are allowable categories of work which may be completed or coordinated by an Outdoor Environment Limited Service Specialty Contractor:
Minor Grading
Erosion Control
Retaining Walls
Excavation
Electrical Grounding, Lighting and Equipment
Plumbing related to Pool Circulation and Drains
Yard Drains
Concrete Walls and Reinforcing Steel
Shotcrete
Pool Liners
Masonry
Concrete and Architectural Decks on Grade
Pool Equipment
Landscape and Irrigation
Fencing
Fireplaces
Arbors
Outdoor Kitchens
Related Site Equipment
You may be required to hold a contractor license if your company exceeds this scope of work.
Parks and Recreation
The following are allowable categories of work which may be completed or coordinated by a Parks and Recreation Limited Service Specialty Contractor:
Trails
Non-Occupied Structures
Grading
Walkways
Restroom and Stadiums
Pre-manufactured Equipment
You may be required to hold a contractor license if your company exceeds this scope of work.
Pre-Engineered Metal Building
The following are allowable categories of work which may be completed or coordinated by a Pre-engineered Metal Building Limited Service Specialty Contractor:
Rigid Frame
Siding
Roof Panels
Associated Doors and Window Opening
Canopies
You may be required to hold a contractor license if your company exceeds this scope of work.
Pre-Manufactured Structures
The following are allowable categories of work which may be completed or coordinated by a Pre-manufactured Metal Canopy Limited Service Specialty Contractor:
Concrete Work
Electrical
Metal Carport Covers
Metal Patio Covers
Storage Buildings (250 square feet or less)
You may be required to hold a contractor license if your company exceeds this scope of work.
Racking Systems
The following are allowable categories of work which may be completed or coordinated by a Racking Systems Limited Service Specialty Contractor:
Design plan view layout
Design elevation views of storage racks
Manufacturer of storage racks to supply pre-engineered materials to support the pallet and/or carton loads
Manufacturer of storage racks to be compliant to the latest RMI (Rack Manufacturers Institute) specifications. The following is a link regarding RMI information: www.mhia.org/industrygroups/rmi
Provide seismic calculations and stamped drawing when applicable for Rack Permit
Mechanical installation
Demolition
Repair Work
You may be required to hold a contractor license if your company exceeds this scope of work.
Railroad Related Construction
The following are allowable categories of work which may be completed or coordinated by a Railroad Related Construction Limited Service Specialty Contractor:
Related sitework/minor grading
Layout and engineering
New track and turnout construction
Rehabilitate existing track
Maintenance contracts
24 hour emergency repair service
| 
